Eco HB-52 Pure Eco

Properties

Removes dried ink residues that form a barrier, hindering the action of emulsions (strippers).
Enhances the action of emulsion removers on old or hardened screens (recovery difficulties).
Eliminates stains (ghost images) and remnants of paint and emulsions from screens (when used with HB 54 Alkaline Paste).
HB 52 paste and gel removers are particularly useful for large screens, as they can be applied with the screen in a vertical position, avoiding the use of immersion tanks.
HB 52 Extra and Eco liquid removers can be used in immersion tanks, cleaning machines, or combined with HB 54 Alkaline Paste for ghost image removal.
HB 52 Eco Remover is an eco-friendly product (free from volatile solvents).
Non-flammable. Ideal for UV inks and plastisols.

Removal of paint residues before applying emulsion removers:

Apply HB 52 Paint and Emulsion Residue Remover with a nylon brush on both sides of the dirty screen.
Allow it to work for about 5 minutes; scrub with the brush to help remove the paint residues. For very hardened residues, let HB 52 act for a longer time.
Do not let the product dry on the screen.
Rinse the screen with running water.
Now the emulsion is ready to be removed. Apply HB 50 Film and Emulsion Remover according to its technical information.

Removal of emulsion residues:

(If the emulsion was not completely removed using the emulsion remover) Rinse the screen with running water and let it drain. With the screen still wet, apply HB 52 Remover with a nylon brush on both sides of the screen.
Allow it to work for about 5 minutes. Scrub with the brush until the residue dissolves. For hardened waste, let HB 52 act for a longer time.
Do not let the product dry on the screen.
Rinse the screen with running water, then use a high-pressure water jet until the screen is completely clean.

It may not always be possible to remove stains from catalyzed or cured epoxy inks.
The information contained in this bulletin represents our current best knowledge but does not imply any liability. We recommend testing the product before use. Industrial use only.