Instructions for Use

• Apply onto the base using a brush, sponge, or paint roller. Spread evenly, avoiding irregular layers, and let it dry. TIP: For printing on paper or very delicate fabrics, HB 80 can be diluted up to 50% in water. For screen application, use the concentrated version of HB 80 and apply with a mesh fabric between 55 and 90 threads/cm and Dualfilm PA photographic emulsion for matrix registration.
• Once dry, the product provides a permanent “tack,” allowing the printing process to begin. If reapplication is necessary, wait until it is completely dry before restarting the printing process. TIP: After drying, HB 80 is resistant to aqueous products. Therefore, brushes and tools used should be cleaned with water immediately after use.
• To remove HB 80 from the surface, apply Decasolv 80 (non-flammable at room temperature) with a sponge or ink roller and let it sit for a few minutes. Then, scrape off the adhesive with a plastic spatula and clean with a water-dampened sponge.